
Endless Applications and All-Season Productivity
CASE 580N Features
Purpose-Built Performance
Long, heavy-duty loader arms with dual-in-line cylinders can lift more than 6,800 lb. and easily clear dump truck walls, and with the backhoe’s universal coupler option works with most attachments (factory-installed thumb also available). The Comfort Steer option cuts time by cutting lock-to-lock turns in half for repetitious loading jobs. For load-and-carry work or during travel, the exclusive over-center design and Ride Control option help reduce material-spilling bounce of the machine and the bucket, and with automatic drive engagement of the optional PowerDrive transmission, you’ll have responsive speed into the pile and around the site. With the Extendahoe® configuration, the backhoe can achieve depths of over 18 feet and with the standard ProControl system, any operator can precisely control the boom for faster cycles.
Common-Sense Fuel Efficiency
We know saving fuel is important. That’s why our Economy Package comes standard. It includes ECO Modes for the loader and backhoe as well as an Engine Auto-Idle and Auto-Off, which can be adjusted to set their timing to how you work. And of course, with the SCR Tier 4 Final after-treatment system (Selective Catalytic Reduction), you get fuel savings without compromising power.
CASE Comfort & Visibility
The little things make a big difference. Like a fully integrated loader control lever and the joystick FNR (standard on PowerDrive transmissions) that lets you shift without letting go of the wheel. Or infinitely adjustable pilot control towers and adjustable wrist rests to help anybody work more comfortably. Or optional LED lights that provide more visibility with less power drain on those long nights and a low-profile hood that gives better sight of the bucket. There’s also hands-free Bluetooth with USB, lots of cab options and a hand-stitched, multi-colored, heated suspension seat – the list goes on. Come see for yourself.
Simple Serviceability
Daily maintenance doesn’t get much easier. Check your engine oil, transmission fluid or coolant, and fill-up the fuel and DEF tank (Diesel Exhaust Fluid), all from one ground-level spot. The CASE 580N Backhoe Loader also offers externally adjustable Extendahoe wear pads so you can quickly tighten up any dipper slop. A battery disconnect and jumpstart terminals – both standard – provide added security and convenient access, and with the SCR-only Tier 4 Final solution, there’s no particulate filter maintenance to worry about.
CASE 580N Details
- ROPS/FOPS certified protective canopy
- Anti-vandalism cover for dash – w/ canopy only
- Rear fenders extensions
- Coat hook w/ garment strap
- Interior rearview convex mirror
- Non-suspension seat – 180° swivel – Vinyl
- 2 in (50 mm) retractable seat belt
- Cup holder/ storage tray mounted on left-hand fender
- Right-hand storage compartment w/ lid
- Gauges:
- Engine water temperature
- Converter oil temperature
- Fuel level
- Tachometer/ hourmeter
- DEF level
- Warning lights:
- Air cleaner restriction
- Alternator
- A/C high pressure
- Cold start
- Engine oil pressure
- Hydraulic oil filter bypass
- Parking brake engagement
- Low fuel
- Water in fuel
- Low DEF
- Audible alarms w/ diagnostics:
- Coolant temperature
- Engine oil pressure
- Parking brake engagement
- Converter oil temperature
- Shuttle engagement/seat position
- Backup alarm
- Low DEF
- Horn – Dual switched front and rear
- FPT F5BFL413C diesel
- Cooled EGR
- Selective Catalytic Reduction – SCR
- Full flow engine oil filter
- Aspirated air cleaner – replaceable dual element dry type with radial seal
- Fuel filter with water trap
- Radiator with de-aeration bottle
- Antifreeze to -34° F (-37° C)
- Throttles – foot and rotary hand
- Self-adjusting belt
- High Pressure Common Rail computer controlled injection with diagnostic features
- Engine ECO Mode – Detent on backhoe hand throttle, push button switch on dash
- Auto Engine Idle
- Auto Engine Shutdown
- Auto Protection Shutdown
- Electronic Fuel Priming
- Front axle, as selected:
- 2WD front axle with 11.0 L x 16.0 tires
- 4WD mechanically driven front axle, with 12.0 L x 16.5 tires
- Rear axle:
- 2/4WD heavy-duty outboard planetary drive, with 17.5 L x 24.0 tires
- 4F-4R Power Shuttle
- Synchromesh transmission
- Torque converter – 11.8 in (300 mm)
- On-the-go electric 4WD control
- Electric F/R shuttle control
- Electric differential lock control, with push-button activation on the loader control lever
- Park brake, spring-applied, hydraulic release – SAHR
- Pump:
- 28.5 gal/min @ 3,350 psi
- (107.9 L/min @ 231 bar)
- Heavy-duty hydraulic oil cooler
- 7-micron, spin on oil filter
- Bucket position indicator
- Lifting lugs on standard bucket
- Single lever control with self-leveling and return-to-dig
- Hand operated clutch disconnects on loader and shift levers, single lever 4-function loader control: lift, dump, clutch cut-out, differential lock
- Over center design, Fabricated “S” boom
- Open-center hydraulics – ProControl System
- Forward tilt engine hood
- Replaceable, molded front bumpers
- Front/Rear tie downs
- Reflective logos
- Signal Lights – cab and canopy:
- 2 rear tail/stop
- 2 front flashers/turn
- 2 rear flashers/turn
- Working/Driving Lights – cab only:
- Adjustable halogen work lights – 55 W:
- 4 front
- 2 side – one left, one right
- 4 rear
- Working/Driving Lights – canopy only:
- Adjustable halogen work lights – 55 W:
- 2 front
- 2 side – one left, one right
- 2 rear
- Master disconnect switch and remote jump-start terminals
- Hydrostatic steering
- Backup alarm
- Vertical spin-on engine oil, fuel and hydraulic filters
- CASE SiteWatch™ Telematics – includes hardware and a 3-yr Advanced data subscription