Some of our most common requested tips and troubleshooting requests are listed below to help you diagnose or fix any issues that are frequently seen in the specific piece of equipment below.
Don’t see what your looking for? Feel free to contact one of our techs and submit your question using the form on the right hand side of this page.
Initial trouble shooting tips
1) Check if the lever feels stuck.
2) Check if it will work after shutting down and restarting.
3) Check if you can shift with the multi-control handle.
Initial trouble shooting tips
1) Restart the unit and see if they come back on line
2)Check fuse
Initial trouble shooting tips
1)check fuse# 35. If fuse is blown replace fuse and proceed to step 2
2)is there an implement connected? If so, disconnect implement wiring and retest
3) if fuse fails again please call your local RME dealer there is a wiring issue on the tractor.
4) If fuse does not fail there is a wiring issue on the implement please call your local RME dealer
Initial trouble shooting tips
1) swap the impellent coupler at the remote. Remote lever will operate backwards but does the impellent operate properly
2) move the impellent couplers to a known good/working remote bank. Check operation
3) replace the impellent hose couplers. Pioneer tips
Initial trouble shooting tips
1) Try the implement in another remote and see if it works
2) swap couplers as they can fail
3) verify if the green cylinder light comes on when using remote lever, this will narrow down if it’s a lever issue or a valve slice issue.
